Users Guide

Security Commands 1139
Port......................................... Gi1/0/2
EAPOL Frames Received.......................... 0
EAPOL Frames Transmitted....................... 0
EAPOL Start Frames Received.................... 0
EAPOL Logoff Frames Received................... 0
Last EAPOL Frame Version....................... 0
Last EAPOL Frame Source........................ 0000.0000.0000
EAP Response/Id Frames Received................ 0
EAP Response Frames Received................... 0
EAP Request/Id Frames Transmitted.............. 0
EAP Request Frames Transmitted................. 0
Invalid EAPOL Frames Received.................. 0
EAPOL Length Error Frames Received............. 0
clear authentication authentication–history
Use the clear authentication authentication–history command to clear all
802.1x and authentication manager history in the authentication history table
captured during successful and unsuccessful authentication.
Syntax
clear authentication authentication–history
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode
User Guidelines
This command clears all 802.1x and authentication manager history on the
switch.
Command History
The clear dot1x authentication–history syntax was deprecated in favor of the
clear authentication authentication-history in version 6.6 firmware.