Users Guide

Dell EMC Networking CLI 121
IP Addressing
Command Description Mode
a
clear host Deletes entries from the host name-to-address
cache.
PE
clear ip address-conflict-
detect
Clears the address conflict detection status in
the switch.
PE
interface out-of-band Enters into OOB interface configuration mode. GC
ip address Configures an IP address on an in-band
interface.
IC
ip address (Out-of-Band) Sets an IP address for the out-of-band interface. IC
ip address-conflict-detect
run
Triggers the switch to run active address conflict
detection by sending gratuitous ARP packets for
IPv4 addresses on the switch.
GC
ip address dhcp (Interface
Configuration)
Acquires an IP address on an interface from the
DHCP server.
IC
ip default-gateway Defines a default gateway (router). GC
ip domain-lookup Enables IP DNS-based host name-to-address
translation.
GC
ip domain-name Defines a default domain name to complete
unqualified host names.
GC
ip host Configures static host name-to-address
mapping in the host cache.
GC
ip name-server Defines available IPv4 or IPv6 name servers. GC
ip name-server source-
interface
Configures available name servers. GC
ipv6 address (Interface
Configuration)
Sets the IPv6 address of the management
interface.
IC
ipv6 address (OOB Port) Sets the IPv6 prefix on the out-of-band port. IC
ipv6 address dhcp Enables the DHCPv6 client on an IPv6
interface.
IC
ipv6 enable (Interface
Configuration)
Enables IPv6 on an interface. IC