Users Guide

Layer 3 Routing Commands 1430
Command History
Introduced in version 6.2.0.1 firmware.
Updated in version 6.3.0.1 firmware.
Example
console#show ip bgp statistics
Delta T Phase UpdGrp GenId Reason Peer Duration Adds Mods Dels
-------- ----- ------ ----- -------------- ------- -------- ----- ----- -----
02:01:07 2 3 Local route add 0 3 0 0
00:10:38 3 0 3 New update grp 0 3 0 0
00:05:51 2 4 Local route add 0 1 0 0
00:05:51 3 0 4 Phase 2 done 0 1 0 0
00:05:30 2 5 Local route del 0 0 0 1
00:05:20 3 0 5 Phase 2 done 0 0 0 1
show ip bgp summary
This command displays a summary of BGP configuration and status.
Syntax
show ip bgp [vrf vrf-name ] summary
• vrf
vrf-name — Displays the aggregate address information associated
with the named VRF.
Default Configuration
By default, information about the global VRF is shown.
Command Mode
User Exec mode, Privileged Exec mode, Global Config mode and all sub-
modes.
User Guidelines
If the vrf-name argument is specified, information pertaining to that VRF is
displayed.
Mods The number of routes modified. Always 0 for phase 1.
Dels The number of routes deleted. Always 0 for phase 1.