Users Guide

152 Dell EMC Networking CLI
802.1x
Command Description Mode
a
dot1x eapolflood Enables the flooding of received IEEE 802.1x
frames in the VLAN.
GC
clear authentication sessions Begins the initialization sequence on the
specified port.
PE
mab Enables MAB on an interface. IC
default mab Configures the switch to transmit EAP, PAP, or
CHAP credentials to the RADIUS server for
MAB-authenticated devices connected to the
interface.
IC
mab request format
attribute 1
Configures the format of the MAC address sent
in the User-Name attribute.
IC,
GC
mab request format
attribute 2
Overrides the password sent in MAB Access
Requests.
GC
dot1x max-reauth-req Sets the maximum number of times that the
switch sends Extensible Authentication
Protocol EAP-Request/Identity frames to which
no response is received before restarting the
authentication process.
IC
dot1x max-req Sets the maximum number of times the switch
sends an EAP-request frame to the client before
restarting the authentication process.
IC
dot1x max-start Configures the number of EAPOL start frames
that the switch supplicant sends to initiate
authentication before it concludes that there is
no authenticator connected.
IC
dot1x pae Enables 802.1X on an interface and sets the
interface role.
IC
authentication host-mode Configures the host mode of an interface. IC
authentication max-users Sets the maximum number of clients supported
on the port when multi-auth authentication is
enabled on the port.
IC
authentication port-control Enables manual control of the authorization
state of the port.
IC