Users Guide

Dell EMC Networking CLI 191
ipv6 pim (VLAN Interface
config)
Administratively enables PIM-SM multicast
routing mode on a particular IPv6 router
interface.
IC
ipv6 pim bsr-border Prevents bootstrap router (BSR) messages from
being sent or received through an interface.
IC
ipv6 pim bsr-candidate Configures the router to announce its
candidacy as a bootstrap router (BSR).
GC
ipv6 pim dense-mode Administratively configures PIM dense mode
for IPv6 multicast routing.
GC
ipv6 pim dr-priority Sets the priority value for which a router is
elected as the designated router (DR).
IC
ipv6 pim hello-interval Administratively configures the PIM-SM Hello
Interval for the specified interface.
IC
ipv6 pim join-prune-interval Administratively configures the interface
join/prune interval for the PIM-SM router.
IC
ipv6 pim register-threshold Configures the Register Threshold rate for the
RP router to switch to the shortest path.
GC
ipv6 pim rp-address Statically configures the Rendezvous Point (RP)
address for one or more multicast groups.
GC
ipv6 pim rp-candidate Configures the router to advertise itself as a
PIM candidate rendezvous point (RP) to the
bootstrap router (BSR).
GC
ipv6 pim sparse-mode Administratively configures PIM sparse mode
for multicast routing.
GC
ipv6 pim ssm Defines the Source Specific Multicast (SSM)
range of multicast addresses.
GC
show ipv6 pim Displays global status of IPv6 PIMSM and its
IPv6 routing interfaces.
PE or
GC
show ipv6 pim bsr-router Display the bootstrap router (BSR)
information.
UE,
PE, or
GC
show ip mroute group Displays the multicast configuration settings PE
show ip mroute source Displays the multicast configuration settings PE
Command Description Mode
a