Users Guide

210 Dell EMC Networking CLI
Command Line Configuration Scripting
sntp unicast client enable Enables clients to use Simple Network Time
Protocol (SNTP) predefined Unicast clients.
GC
clock timezone hours-offset Sets the offset to Coordinated Universal Time. GC
no clock timezone Resets the time zone settings. GC
clock summer-time
recurring
Sets the summertime offset to UTC recursively
every year.
GC
clock summer-time date Sets the summertime offset to UTC. GC
no clock summer-time Resets the summertime configuration. GC
show clock Displays the time and date from the system
clock.
PE
a. For the meaning of each Mode abbreviation, see Mode Types .
Command Description Mode
a
a. For the meaning of each Mode abbreviation, see Mode Types .
Configuration and Image Files
script apply Applies commands in the script to the switch. PE
script delete Deletes a specific script. PE
script list Lists all scripts present in the switch. PE
script show Displays the contents of a script file. PE
script validate Validates a script file. PE
Command Description Mode
a
boot system Specifies the system image that the switch loads
at startup.
PE
clear config Restores switch to default configuration. PE
copy Copies files from a source to a destination. PE
delete Deletes a file from a flash memory. PE
dir Prints the contents of the flash file system. PE
Command Description Mode
a