Users Guide

Switch Management Commands 2121
Syntax
key-server priority value
no key-server priority
•
value — The MKA key server priority. The range is 0 to 255.
Default Configuration
The default priority is 16.
Command Mode
MACsec Policy Configuration mode
User Guidelines
Lower numerical values indicate a higher preference.
Command History
Command introduced in version 6.7.0 firmware.
macsec-cipher-suite
Use this command to configure the MACsec cipher suite for an MKA policy.
To set the default cipher suite, use the no form of the command.
Syntax
macsec-cipher-suite {gcm-aes-128 | gcm-aes-256 | gcm-aes-xpn-128 | gcm-
aes-xpn-256}
no macsec-cipher-suite
• gcm-aes-128 — Galois counter mode of the Advanced Encryption
Standard using a 128-bit key.
• gcm-aes-256 — Galois counter mode of the Advanced Encryption
Standard using a 256-bit key.
• gcm-aes-xpn-128 — Galois counter mode of the Advanced Encryption
Standard using a 128-bit key with extended packet numbering.
• gcm-aes-xpn-256 — Galois counter mode of the Advanced Encryption
Standard using a 256-bit key with extended packet numbering.