Users Guide

Layer 2 Switching Commands 358
User Guidelines
There are no user guidelines for this command.
Example
console #show dhcp l2relay all
DHCP L2 Relay is Enabled.
Interface L2RelayMode TrustMode
---------- ----------- --------------
Gi1/0/2 Enabled untrusted
Gi1/0/4 Disabled trusted
VLAN Id L2 Relay CircuitId RemoteId
--------- ---------- ----------- ------------
3 Disabled Enabled --NULL--
5 Enabled Enabled --NULL--
6 Enabled Enabled --dell--
7 Enabled Disabled --NULL--
8 Enabled Disabled --NULL--
9 Enabled Disabled --NULL--
10 Enabled Disabled --NULL--
show dhcp l2relay interface
Use the show dhcp l2relay interface command to display DHCP L2 Relay
configuration specific to interfaces.
Syntax
show dhcp l2relay interface {all | interface-id }
•
all — Show all interfaces.
• interface-id — Show the specified interface information. The interface may be an
Ethernet interface or a port-channel.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes