Users Guide

Layer 2 Switching Commands 443
Multiple Collision Frames..................... 0
Late Collision Frames......................... 0
Excessive Collision Frames.................... 0
Frames RX and TX 64 Octets.................... 0
Frames RX and TX 65-127 Octets................ 0
Frames RX and TX 128-255 Octets............... 0
Frames RX and TX 256-511 Octets............... 0
Frames RX and TX 512-1023 Octets.............. 0
Frames RX and TX 1024-1518 Octets............. 0
Frames RX and TX 1519-2047 Octets............. 0
Frames RX and TX 2048-4095 Octets............. 0
Frames RX and TX 4096-9216 Octets............. 0
GVRP PDUs received............................ 0
GVRP PDUs Transmitted......................... 0
GVRP Failed Registrations..................... 0
GMRP PDUs Received............................ 0
GMRP PDUs Transmitted......................... 0
GMRP Failed Registrations..................... 0
BPDUs Transmitted............................. 0
BPDUs Received................................ 0
EAPOL Frames Transmitted...................... 0
EAPOL Start Frames Received................... 0
Time since counters last cleared.............. 11 day 22 hr 28 min 22 sec
show statistics switchport
Use the show statistics command to display detailed statistics for a specific
port or for the entire switch.
Syntax
show statistics { interface-id |switchport}
•
interface-id —The interface ID. See Interface Naming Conventions for
interface representation.
• switchport—Displays statistics for the entire switch.
Default Configuration
This command has no default configuration.