Users Guide

Layer 2 Switching Commands 468
show ethernet cfm maintenance-points remote
Use the show ethernet cfm maintenance-points remote command to display
the configured remote maintenance points.
Syntax
show ethernet cfm maintenance-points remote {level 0-7 | domain domain-
name
| detail [mac mac-address | mep mpid ] [domain domain-name | level
0-7 ] [vlan vlan-id ]}
• domain—Name of the maintenance domain (an alphanumeric string of
up to 43 characters in length).
• level—Maintenance association level
•
mac-addr — The destination MAC address for which the connectivity needs to
be verified. Either MEP ID or the MAC address option can be used.
• vlan-id — A VLAN associated with the maintenance domain. Range: 1-4093.
• mpid — The MEP ID from which the loopback message needs to be transmitted.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec, Global Configuration mode and all Configuration submodes
User Guidelines
Refer to IEEE 802.1ag for an explanation of the maintenance association
level and MEP ID. Typically, these are assigned by the top level network
service provider.
• MEP Id—Local MEP identifier
• RMep Id—Remote MEP identifier
• Level—Connectivity association level
• MAC—Destination MAC address
• VLAN—VLAN on which the MEP is configured
• Expiry timer—The configured MEP expiry timer