Administrator Guide
BGP 1421
Dell EMC Networking BGP can only be
configured through the CLI. SNMP
support is limited to the standard MIB,
which primarily provides status
reporting, and a proprietary MIB which
provides additional status variables.
Configuration through SNMP is not
supported.
Dell EMC
Networking
requirement
–
BGP may learn the maximum number
of routes supported by each Dell EMC
Networking N-Series switch:
• N3000: 8160 (IPv4), 4096 (IPv6)
• N3100-ON: 8160 (IPv4), 4096 (IPv6)
• N4000: 8160 (IPv4), 4096 (IPv6)
Dell EMC
Networking
requirement
–
Table 39-4. BGP Limitations (Continued)
Description Source Compliance