Administrator Guide

172 Hardware Overview
Figure 3-26. Dell EMC Networking N4032 Front Panel
Figure 3-27. Dell EMC Networking N4032F Front Panel
Dell EMC Networking N4032 and N4032F switches can be stacked with
other Dell EMC Networking N4000 Series switches using 10G or 40G SFP+
or QSFP modules in the module bay.
The Dell EMC Networking N4064 front panel provides 48 x 10GbE copper
ports and two fixed QSFP ports, each supporting 4 x 10G or 1 x 40G
connections. The Dell EMC Networking N4064F front panel provides 48
SFP+ ports supporting SFP+ and SFP transceivers plus two fixed QSFP
ports, each supporting 4 x 10G or 1 x 40G connections.
All Dell EMC Networking N4000 Series ports operate in full-duplex mode
only. The copper ports require that auto-negotiation be enabled. Auto-
negotiation should be disabled for Dell EMC Networking N4000 Series SFP+
ports and enabled for SFP+ ports with SFP transceivers installed.
10GbE Copper Ports Module bay
USB port
10GbE Fiber Ports Module bay
USB port