Administrator Guide

Images and File Management 543

Copy the running-config to the USB flash drive.

console#copy running-config usb://rc_backup.scr

Mode............................. Binary

Data Type........................ Config Script

Source Filename.................. temp-config.scr

Management access will be blocked for the duration of the

transfer

Are you sure you want to start? (y/n) y

Download the new image from the USB flash drive to the switch. The

image overwrites the backup image.

console#copy usb://new_image.stk backup

Mode................................... Binary

Data Type.............................. Code

Destination Filename................... backup

Management access will be blocked for the duration of the

transfer

Are you sure you want to start? (y/n) y

To activate the new image after it has been successfully downloaded to the

switch, follow the procedures described in Upgrading the Firmware,

starting with step 5.