Users Guide

DHCP Server Settings 1177
Monitoring DHCP Server Information
Use the following commands to view bindings, conflicts, and statistics, and to
clear the information.
lease
{days[hours][minutes] |
infinite}
Specify the duration of the lease for an IP address that is
assigned from a DHCP server to a DHCP client.
• days— Days the lease is valid (Range 0–59, Default is 1).
The hours and minutes can optionally be specified after
the days.
• infinite — 60 day lease. The Dell EMC Networking
DHCP server does not offer infinite leases. A setting of
infinite corresponds to 60 days.
default-router address1
[address2....address8]
Specify the list of default gateway IP addresses to be
assigned to the DHCP client.
dns-server address1
[address2....address8]
Specify the list of DNS server IP addresses to be assigned
to the DHCP client.
domain-name domain Specify the domain name for a DHCP client.
option code {ascii string
| hex string1
[string2...string8] | ip
address1
[address2...address8]}
Manually configure DHCP options.
CTRL + Z Exit to Privileged Exec mode.
show ip dhcp pool
configuration {name |
all}
View the settings for the specified address pool or for all
configured address pools.
Command Purpose
show ip dhcp binding
[address]
View the current binding information in the DHCP server
database. Specify the IP address to view a specific binding.
clear ip dhcp binding
{address | *}
Delete an automatic address binding from the DHCP
server database. Use * to clear all bindings.
show ip dhcp conflict
[address]
View the current binding conflicts in the DHCP server
database. Specify the IP address to view a specific conflict.
Command Purpose