Users Guide

Images and File Management 563
Managing Files in Internal Flash
Use the following commands to copy, rename, delete and list the files in the
internal flash.
Command Purpose
dir [filepath] List the files in the flash file system.
copy flash://filename
usb://filename
Copy a file from the internal flash to a USB flash drive.
Use the dir command to see a list of the files that can be
copied from the internal flash.
Make sure a flash drive has been inserted in the USB port
on the front panel before executing the command.
rename current_name
new_name
Rename a file in flash.
delete filename Remove the specified file.
erase {startup-config |
backup-image | backup-
config | application
filename}
Erase the startup configuration, the backup configuration,
the backup image, or an application.
copy startup-config
backup-config
Save the startup configuration to the backup configuration
file.
copy running-config
startup-config
Copy the current configuration to the startup
configuration. This saves the current configuration to
NVRAM.
show startup-config View the contents of the startup-config file
show running-config View the contents of the running-config file