Install Guide

Prerequisites
The following is a list of components that are required for successful switch installation:
NOTE: For detailed installation instructions, see Site preparations and N2200-ON Series switch installation.
● N2200-ON Series switch or multiple switches, if stacking
● AC or DC country- and regional-specific cables to connect the AC or DC power source to the AC or DC PSU
● Hot-swappable AC or DC PSUs; minimum one AC or DC PSU
● Hot-swappable fan modules
● #1 and #2 Phillips screwdrivers, not included
● Torx screwdriver, not included
● Copper or fiber cables
● L-bracket and screws for two-post rack mount
● DC only: Ground lug and screws
● Rubber feet
Other optional components are:
● Extra mounting brackets and screws
● Second AC or DC PSU
● MPS-1S shelf
● MPS-3S shelf
N2200-ON Series switch configurations
You can order the N2200-ON Series switch in several different configurations.
● N2200-ON Series AC or DC Normal Airflow switch:
○ N2224X-ON—one U, 24 ports 2.5GBASE-T RJ24, four ports 25G SFP28, two 40G ports QSFP+ for stacking, two
pluggable AC or DC PSUs, and two fan subsystems
○ N2224PX-ON—one U, 24 ports 2.5GBASE-T RJ24 made up of 12 ports 802.3 Type-2 30W PoE and 12 ports 802.3bt
Type-3 60W PoE, four ports 25G SFP28, two 40G ports QSFP+ for stacking, two pluggable AC or DC PSUs, (optional)
one EPS, and two fan subsystem
○ N2248X-ON—one U, 48 ports 2.5GBASE-T RJ24, four ports 25G SFP28, two 40G ports QSFP+ for stacking, two
pluggable AC or DC PSUs, and three fan subsystems
○ N2248PX-ON—one U, 48 ports 2.5GBASE-T RJ24 made up of 24 ports 802.3 Type-2 30W PoE and 24 ports 802.3bt
Type-3 60W PoE, four ports 25G SFP28, two 40G ports QSFP+ for stacking, two pluggable AC or DC PSUs, (optional)
one EPS, and three fan subsystem
● N2200-ON Series AC Reverse Airflow switch:
○ N2224X-ON—one U, 24 ports 2.5GBASE-T RJ24, four ports 25G SFP28, two 40G ports QSFP+ for stacking, two
pluggable AC PSUs, and two fan subsystems with airflow from the power supply side to the I/O side
NOTE: Reverse airflow is not supported on the N2224X-ON DC switch.
○ N2248X-ON—one U, 48 ports 2.5GBASE-T RJ24, four ports 25G SFP28, two 40G ports QSFP+ for stacking, two
pluggable AC PSUs, and three fan subsystems with airflow from the power supply side to the I/O side
NOTE: Reverse airflow is not supported on the N2248X-ON DC switch.
Fan and PSU airflow
● N2224X-ON and N2248X-ON—Fans have airflow from the I/O side to the PSU side (normal) and airflow from the PSU side
to the I/O side (reverse).
● N2224PX-ON and N2248PX-ON—Fans have airflow from the I/O side to the PSU side (normal).
● AC or DC power supply has airflow from the I/O side to the PSU side (normal).
● AC power supply also has airflow from the PSU side to the I/O side (reverse).
14
N2200-ON Series switch