Install Guide

About this guide

This guide provides site preparation recommendations, step-by-step procedures for rack mounting and desk mounting your

switch, inserting modules, and connecting to a power source.

CAUTION: To avoid electrostatic discharge (ESD) damage, wear grounding wrist straps when handling this

equipment.

NOTE: Only trained and qualified personnel can install this equipment. Read this guide before you install and power up this

equipment. This equipment contains two power cords. Disconnect both power cords before servicing.

NOTE: This equipment contains optical transceivers, which comply with the limits of Class 1 laser radiation.

Figure 1. Class 1 laser product tag

NOTE: When no cable is connected, visible and invisible laser radiation may emit from the aperture of the optical

transceiver ports. Avoid exposure to laser radiation. Do not stare into open apertures.

NOTE: Read this guide before unpacking the switch. For unpacking instructions, see Unpack.

Visual display workplaces

This device is not intended for use in the direct field of view at visual display workplaces. To avoid incommoding reflections at

visual display workplaces, this device must not be placed in the direct field of view.

Bemerkung: Dieses Gerät ist nicht für den Einsatz im direkten Sichtfeld am Bildschirmarbeitsplatz vorgesehen. Um störende

Reflexionen am Bildschirmarbeitsplatz zu vermeiden, darf dieses Gerät nicht im direkten Sichtfeld platziert werden.

Regulatory

● Marketing model N2224X-ON is represented by the regulatory model E41W and the regulatory type E41W001.

● Marketing model N2248X-ON is represented by the regulatory model E41W and the regulatory type E41W002.

● Marketing model N2224PX-ON is represented by the regulatory model E41W and the regulatory type E41W003.

● Marketing model N2248PX-ON is represented by the regulatory model E41W and the regulatory type E41W004.

Topics:

• Related documents

• Information symbols

About this guide 5