Setup Guide

Your N2200-ON switch supports basic switching features such as VLANs and

spanning tree protocol. Use the Web-based management interface or the CLI

to configure the features your network requires. For information about how to

configure the switch features, see the User’s Configuration Guide or CLI

Reference Guide available on the support site:

dell.com/support/manuals

Specifications

This section lists the N2200-ON Series switch specifications.

CAUTION: Operate the product at an ambient temperature not higher than 45°C (113°F).

CAUTION: Lithium battery Caution: There is a danger of explosion if the battery is

incorrectly replaced. Replace only with same or equivalent type of battery.

Dispose of the batteries according to the instructions of the manufacturer.

For RoHS information, refer to Restricted Material Compliance at

https://www.dell.com/learn/us/en/uscorp1/envt-info-materials.

Chassis Physical Design

Table 1-9. Chassis Physical Design

Parameter Specifications

Height x Width x Depth

• 1.71 in x 17 in x 15.75 in (H x W x D)

• 43.5 mm x 434 mm x 400 mm (H x W x D)

Chassis weight with one PSU

installed

• N2224X-ON: 14.30 lbs (6.485 kg) — PSU is

1.75 lbs, 0.79 kg (550W)

• N2224PX-ON: 14.70 lbs (6.67 kg) — PSU is

1.95 lbs, 0.88 kg (1050W)

• N2248X-ON: 15.09 lbs (6.845 kg) — PSU is

1.75 lbs, 0.79 kg (550W)

• N2248PX-ON: 15.77 lbs (7.155 kg) — PSU is

2.0lbs, 0.90 kg (1600W)

Rack clearance required Front: 5 inches (12.7 cm)

Back: 5 inches (12.7 cm)