Users Guide

Security Commands 1045
Command History
Introduced in version 6.2.0.1 firmware. Command updated in version 6.5.2
firmware. Output updated in version 6.6 firmware.
Named Accounting
Server Groups
The number of configured named accounting RADIUS
server groups.
Timeout The configured timeout value, in seconds, for request
retransmissions.
Retransmit The configured value of the maximum number of times a
request packet is retransmitted.
Dead Time The configured length of time an unavailable RADIUS
server is skipped.
RADIUS Accounting
Mode
A global parameter to indicate whether the accounting
mode for all the servers is enabled or not.
RADIUS Attribute 4
Mode
A global parameter to indicate whether the NAS-IP-
Address attribute has been enabled to use in RADIUS
requests.
RADIUS Attribute 4
Value
A global parameter that specifies the IP address to be used
in NAS-IP-Address attribute to be used in RADIUS
requests.
Source Interface The source interface from which the source IP address is
obtained.
RADIUS Attribute 6 A global parameter that specifies if the Service-Type is
sent to the RADIUS server.
RADIUS Attribute 8 A global parameter that indicates if the Authenticate-
Only attribute is sent to the RADIUS server.
RADIUS Attribute 25 A global parameter that indicates if the Class attribute is
sent to the RADIUS server.
RADIUS Attribute 31 A global parameter that indicates if the Calling-Station-
ID is sent to the RADIUS server.
RADIUS Attribute 31
format
A global parameter that indicates the format of the
Calling-Station-ID attribute.
Field Description