Users Guide

Layer 3 Routing Commands 1367
Command History
Introduced in version 6.2.0.1 firmware.
Modified in version 6.3.0.1 firmware.
Example
console#show bgp ipv6 summary
IPv6 Routing .................................. Enable
BGP Admin Mode ................................ Enable
BGP Router ID ................................. 1.1.1.1
Local AS Number ............................... 65001
Traps ......................................... Disable
Maximum Paths ................................. 1
Maximum Paths iBGP ............................ 1
Default Keep Alive Time ....................... 30
Default Hold Time ............................. 90
Number of Network Entries ..................... 0
Number of AS Paths ............................ 0
Dynamic Neighbors Current/High/Limit .......... 1/1/20
Default Metric ................................ Not Configured
Default Route Advertise ....................... No
Redistributing:
Source Metric Dist List Route Map
--------- ---------- -------------------------------- ----------------------
Neighbor ASN MsgRcvd MsgSent State Up/Down Time Pfx Rcvd
---------------- ----- -------- -------- ------------- -------------- ------
fe80::21e:c9ff:fede:b13a%Vl10
65000 137 136 ESTABLISHED 0
MsgSent The number of BGP messages sent to this neighbor
State The adjacency state. One of IDLE, CONNECT,
ACTIVE, OPEN SENT, OPEN CNFRM, EST
Up/Down Time How long the adjacency has been in the
ESTABLISHED state, or, if the adjacency is down, how
long it has been down. In days:hours:minutes:seconds
Pfx Rcvd The number of IPv6 prefixes received from the neighbor