Users Guide

Layer 3 Routing Commands 1527
Syntax
show ip protocols [vrf vrf-name]
• vrf-name—The name of the VRF instance on which the command
operates. If no VRF parameter is given, information for the default
(global) router instance is shown.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
The VRF identified in the parameter must have been previously created or an
error is returned.
The VRF parameter is only available on the N3000-ON/N3100-ON/N3200-
ON series switches.
The command displays the following information.
Parameter Description
BGP Section:
Routing Protocol BGP.
Router ID The router ID configured for BGP.
Local AS Number The AS number that the local router is in.
BGP Admin Mode Whether BGP is globally enabled or disabled.
Maximum Paths The maximum number of next hops in an internal or external
BGP route.