Users Guide

Layer 3 Routing Commands 1621
User Guidelines
This command has no user guidelines.
Example
console#show ip mroute
IP Multicast route table
Expiry Up Time
Source IP Group IP (mm:ss) (hh:mm:ss) RPF Neighbor Flags
--------------- --------------- -------- ----------- --------------- -----
192.168.0.11 239.0.5.7 3:03 15:54:12 192.168.0.10
show ip mroute group
Use the show ip mroute group command to display the multicast
configuration settings such as flags, timer settings, incoming and outgoing
interfaces, RPF neighboring routers, and expiration times of all the entries in
the multicast mroute table containing the groupipaddr value.
Syntax
show ip mroute group groupipaddr [summary]
• groupipaddr — IP address of the multicast group.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays the multicast configuration settings such as
flags, timer settings, incoming and outgoing interfaces.
console#show ip mroute group 239.5.5.5 summary
console#show ip mroute group 239.5.5.5