Users Guide

Dell EMC Networking CLI 177
IPv6 Routing
show ip route preferences Displays detailed information about the route
preferences.
PE
show ip route summary Shows the number of all routes, including best
and non-best routes.
PE
show ip traffic Displays IP statistical information. UE or
PE
show ip vlan Displays the VLAN routing information for all
VLANs with routing enabled.
PE
show route-map Displays the route maps. PE
show routing heap summary Displays a summary of the memory allocation
from the routing heap.
PE
a. For the meaning of each Mode abbreviation, see Mode Types .
Command Description Mode
a
arp Clears all entries in the IPv6 neighbor table
or an entry on a specific interface.
PE
clear ipv6 statistics Clears IPv6 statistics for all interfaces or for a
specific interface, including loopback and
tunnel interfaces.
PE
ipv6 address Configures an IPv6 address on an interface
(including tunnel and loopback interfaces).
IC
ipv6 enable Globally enables IPv6 routing. GC
ipv6 hop-limit Configures the hop limit used in IPv6 PDUs
originated by the router.
GC
ipv6 host Defines static host name-to-IPv6 address
mapping in the host cache.
GC
ipv6 mld last-member-
query-count
Sets the number of listener-specific queries
sent before the router assumes that there are
no local members on the interface.
IC (VC)
Command Description Mode
a