Users Guide

Layer 3 Routing Commands 1896
clear vrrp statistics
Use this command to clear VRRP statistical information for given interface of
the device within a Virtual Router Redundancy Protocol version 3 (VRRPv3)
group and IP address family.
Syntax
clear vrrp statistics [{ipv4| ipv6} vlan vlan-id vr-id]
• ipv4—(Optional) Indicates the Virtual router group belongs to an IPv4
address family.
• ipv6—(Optional) Indicates the Virtual router group belongs to an IPv6
address family.
• vlan vlan-id—(Optional) Indicates the VLAN number to which the Virtual
router belongs.
• vr-id—(Optional) Virtual router group number. The range is from 1 to 255.
Default Configuration
Tracking is not enabled by default.
Command Mode
Privileged Exec mode
User Guidelines
If the clear vrrp statistics command is issued without the optional arguments,
then the global statistics for all virtual routers (both IPv4 and IPv6) are reset.
If the optional arguments are specified, the statistics are reset for the virtual
router corresponding to the given (IP address family, interface and VR-ID)
combination.
Command History
Command introduced in version 6.6 firmware.
Example
The following example shows how clear all the Virtual Router Redundancy
Protocol (VRRP) statistics: