Users Guide

Switch Management Commands 2100
Command Mode
User Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
The following table describes the significant fields shown in the display:
Example
The following example displays the RMON event table.
console> show rmon events
Index Description Type Community Owner Last time sent
----- ----------- ---- --------- ------ -------------------
1 Errors Log CLI Jan 18 2005 23:58:17
2 High Broadcast Log-Trap switch Manager Jan 18 2005 23:59:48
show rmon hcalarm
Use the show rmon hcalarm command to display high capacity (64-bit)
alarms configured with the rmon hcalarm command.
Syntax
show rmon {hcalarms | hcalarm number}
Field Description
Index An index that uniquely identifies the event.
Description A comment describing this event.
Type The type of notification that the device generates about this event.
Can have the following values: none, log, trap, log-trap. In the case
of log, an entry is made in the log table for each event. In the case of
trap, an SNMP trap is sent to one or more management stations.
Community If an SNMP trap is to be sent, it is sent to the SNMP community
specified by this octet string.
Owner The entity that configured this event.
Last time sent The time this entry last generated an event. If this entry has not
generated any events, this value is zero.