Users Guide

Switch Management Commands 2143
Debug messages are sent to the system log at the DEBUG severity level. To
print them on the console, enable console logging at the DEBUG level
(logging console debug).
Command History
Command introduced in firmware release 6.6.1.
debug transfer
Use the debug transfer command to enable debug tracing of file transfers.
Syntax
debug transfer
no debug transfer
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode
User Guidelines
Debug commands should be used with caution. Switch behavior may be
adversely affected by the additional processing load incurred by enabling
debug output. Use of debug level logging when performing operations such as
switch failover is not recommended.
Debug messages are sent to the system log at the DEBUG severity level. To
print them on the console, enable console logging at the DEBUG level
(logging console debug).
Command History
Command introduced in firmware release 6.6.1.