Users Guide

Switch Management Commands 2222
is voluminous, cryptic, and because of the large number of messages
generated, can adversely affect switch operations. Only set the logging level to
debug under the direction of support personnel.
Example
The following example sets the SYSLOG message severity level to alert.
console(config-logging)#level alerts
logging cli-command
Use the logging cli-command in Global Configuration mode to enable CLI
command logging.
Syntax
logging cli-command
no logging cli-command
Default Configuration
Disabled
Command Mode
Global Configuration
User Guidelines
See the CLI commands by using the show logging command.
Example
console(config)#logging cli-command
console(config)#do show logging
console#show logging
Logging is enabled
Logging protocol version: 0
Source Interface............................... Default
Console Logging: Level warnings. Messages : 3 logged, 320 ignored
Monitor Logging: disabled
Buffer Logging: Level informational. Messages : 55 logged, 268 ignored