Users Guide

Switch Management Commands 2281
show idprom interface
Use this command to display the optics EEPROM contents in user-readable
format.
Syntax
show idprom interface interface-id
• interface-id—The Ethernet interface.
Default Configuration
This command has no default configuration.
Command Modes
User Exec, Privileged Exec mode, Global Configuration mode and all
Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example shows the optic parameters in user readable format.
console#show idprom interface tengigabitethernet 1/0/9
Type.............................. SFP+
Media............................. 10GBASE-LRM
Serial Number..................... ANF0L5J
Dell EMC Qualified................ Yes
The following example shows the optic parameters, but not the IDPROM
content as the entered activation code in incorrect.
console#show idprom interface tengigabitethernet 1/0/9 debug abc
Type.............................. SFP+
Media............................. 10GBASE-LRM
Serial Number..................... ANF0L5J
Dell EMC Qualified................ Yes