Users Guide

Switch Management Commands 2308
Serial Number..................... CN0H0F6C2829831P0023A00
Up Time........................... 3 days 1 hrs 16 mins 20 secs
Example-Stack Ports
This example displays information about the stack ports.
console#show switch stack-ports
Configured Running
Stack Stack Link Link Admin
Interface Mode Mode Status Speed (Gb/s) Status
---------------- ---------- ---------- ------------ ------------ -----------
Tw1/0/1 Stack Stack Link Down 21 Enabled
Tw1/0/2 Stack Stack Link Up 21 Disabled
Tw2/0/1 Stack Stack Link Down 21 Disabled
Tw2/0/2 Stack Stack Link Up 21 Enabled
Example – All Units in the Stack
This example displays information about all units in the stack.
console>show switch
Management Standby Preconfig Plugged-in Switch Code
SW Status Status Model ID Model ID Status Version
--- ---------- --------- ------------- ------------- ------------- ---------
1 Mgmt Sw N3048 N3048 OK 6.0.0.0
Example-Stacking Links Path
This command tracks the path a packet may take when traversing stacking
links. The command shows active paths only, not those that may be taken
after a stack failover or stack reconvergence.
console#show switch stack-ports stack-path 3 1
Packet-path from unit 3 to unit 1:
1 unit-3 port gi3/0/49 to unit-2
2 unit-2 port gi2/0/49 to unit-1
Example – Switch Firmware Stack Status
The following example displays the Switch Firmware stack status information
for the switch.
console#show switch
Management Standby Preconfig Plugged-in Switch Code
SW Switch Status Model ID Model ID Status Version