Users Guide

Layer 2 Switching Commands 325
Syntax
show switchport voice [ interface-id ]
• interface-id —An Ethernet or port channel interface identifier.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
See the debug auto-voip command for assistance in troubleshooting Auto-
VoIP issues.
This command accepts an Ethernet interface identifier or a port channel
identifier.
Examples
The following example shows command output when a port is not specified:
console#show switchport voice
Interface Auto VoIP Mode Traffic Class
--------- -------------- -------------
Gi1/0/1 Disabled 6
Gi1/0/2 Disabled 6
Gi1/0/3 Disabled 6
Gi1/0/4 Disabled 6
Gi1/0/5 Disabled 6
Gi1/0/6 Disabled 6
Gi1/0/7 Disabled 6
Gi1/0/8 Disabled 6
Gi1/0/9 Disabled 6
Gi1/0/10 Disabled 6
Gi1/0/11 Disabled 6
Gi1/0/12 Disabled 6
Gi1/0/13 Disabled 6
Gi1/0/14 Disabled 6
Gi1/0/15 Disabled 6