Users Guide

Layer 2 Switching Commands 332
Default Configuration
The default timer is 30 seconds.
Command Mode
Global Configuration mode
User Guidelines
Configuring the timer to a low value on a large number interfaces may affect
system processing due to CPU overload. Use the show process cpu command
to examine the system load.
Example
The following example sets the isdp timer value to 40 seconds.
console(config)#isdp timer 40
show isdp
The show isdp command displays global ISDP settings.
Syntax
show isdp
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
There are no user guidelines for this command.
Example
console#show isdp
Timer................................ 30
Hold Time............................ 180