Users Guide
Layer 2 Switching Commands 448
• mac-addr—
The destination MAC address for which the connectivity needs to
be verified. Either MEP ID or the MAC address option can be used.
• remote-mpid—
The MEP ID for which connectivity is to be verified; i.e. the
destination MEP ID.
• domain—
Name of the maintenance domain (an alphanumeric string of up to
43 characters in length).
• vlan-id—
A VLAN associated with the maintenance domain. Range: 1-4093.
• mpid—
The MEP ID from which the loopback message needs to be
transmitted.
• count—
The number of LBMs to be transmitted. The default number is 1.
Default Configuration
By default, this command will transmit one loopback message with a time-out
of five seconds.
Command Mode
Privileged Exec
User Guidelines
This command has no user guidelines.
Example
console #ping ethernet cfm mac 00:11:22:33:44:55 level 1 vlan 10 mpid 1 count
10
traceroute ethernet cfm
Use the traceroute ethernet command to generate a link trace message
(LTM) from the configured MEP.
Syntax
traceroute ethernet cfm {mac mac-addr| remote-mpid 1-8191} {domain
domain name | level 0-7} vlan vlan-id mpid 1-8191 [ttl 1-255]
• level—Maintenance association level