Users Guide

Layer 2 Switching Commands 498
Example
console#show green-mode
Current Power Consumption (mW)................. 11545
Power Saving /Stack (%)........................ 3
Cumulative Energy Saving /Stack (W * H)........ 17
Unit Green Ethernet Features Supported
---- -----------------------------------------------------------------------
1 Energy-Detect EEE LPI-History LLDP-Cap-Exchg Pwr-Usg-Est
Interface Energy-Detect Short-Reach-Config Short-Reach EEE
Config Opr Auto Forced Opr Config
--------- --------- --------- --------- --------- ----------- --------
Gi1/0/1 Enabled Active Enabled Disabled In-Active Enabled
Gi1/0/2 Enabled Active Enabled Disabled In-Active Enabled
Gi1/0/3 Enabled Active Enabled Disabled In-Active Enabled
Gi1/0/4 Enabled Active Enabled Disabled In-Active Enabled
Gi1/0/5 Enabled Active Enabled Disabled In-Active Enabled
Gi1/0/6 Enabled Active Enabled Disabled In-Active Enabled
Gi1/0/7 Enabled Active Enabled Disabled In-Active Enabled
Gi1/0/8 Enabled Active Enabled Disabled In-Active Enabled
show green-mode eee-lpi-history interface
Use the show green-mode eee-lpi-history interface command to display the
interface green-mode EEE LPI history.
Syntax
show green-mode eee-lpi-history interface interface-id
• interface-id —An Ethernet interface identifier. See Interface Naming
Conventions for interface representation.
Default Configuration
This command has no default configuration.
EEE
EEE Config EEE Admin Mode is enabled or disabled.
Term Description