Users Guide

Layer 2 Switching Commands 554
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged Exec mode, Global Configuration mode and all sub-modes
User Guidelines
The following fields are displayed:
Command History
Command introduced in version 6.6.0 firmware.
Example
The examples below display the various invocations of the command:
console #show ip device tracking all
IP Device Tracking for clients......................... Enable
IP Device Tracking Probe Generation.................... Enable
IP Device Tracking Probe Count......................... 3
IP Device Tracking Probe Interval.......................30
IP Device Tracking Probe Delay Interval.................30
Field Description
IP Address Learned IPv4 address of the device.
MAC Address MAC address associated with the learned IPv4 address.
VLAN VLAN identifier associated with an interface on which
device is learned.
Interface Interface name on which device is learned.
Time left to inactive The number of seconds before the reachable device
transitions to INACTIVE.
Time since inactive The number of seconds since the INACTIVE device was
last reachable.
State The table entry state (ACTIVE or INACTIVE).
Source The source of the tables (ARP or DHCP or Static).