Users Guide
Layer 2 Switching Commands 866
Syntax
show vlan association subnet [ip-address ip-mask]
• ip-address — Specifies IP address to be shown
• ip-mask — Specifies IP mask to be shown
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
• IP Address—The configured IP address
• IP Mask—The configured IP subnet mask
• VLAN ID—The associated VLAN identifier
Example
The following example shows the case if no IP Subnet to VLAN association
exists.
console#show vlan association subnet
IP Address IP Mask VLAN ID
---------------- ---------------- -------
The IP Subnet to VLAN association does not exist.
show vlan private-vlan
Use the show vlan private-vlan command to display information about the
configured private VLANs including primary and secondary VLAN IDs, type
(community, isolated, or primary), and the ports which belong to a private
VLAN.
Syntax
show vlan private-vlan [type]