Users Guide

Layer 2 Switching Commands 904
Example
This example clears the MMRP counters on port channel 1
console#clear mmrp statistics po1
mmrp
This command enables MMRP on a specific interface. Use the no form of the
command to disable MMRP on an interface.
Syntax
mmrp
no mmrp
Default Configuration
By default, MMRP is disabled globally and on all interfaces.
Command Mode
Interface Configuration (Ethernet and port channel) and Interface Range
(Ethernet and port channel)
User Guidelines
MMRP is not compatible with GVRP/GMRP. Do not enable MMRP on
switches enabled for GVRP/GMRP.
Enabling MMRP on an interface automatically disables dynamic MFDB
entry creation. MFDB entries are only configured via MMRP when MMRP is
enabled.
Enabling MMRP on a port channel associated Ethernet interface has no
effect as long as the interface is a member of the port channel.
MMRP must also be enabled globally in order to become operational.
This command is only available on the Dell EMC Networking N4000 Series
switches.
Command History
Introduced in version 6.2.0.1 firmware.