Users Guide

Layer 2 Switching Commands 905
Example
This example enables MMRP on port channel 1.
console(config)#interface po1
console(config-if-Po1)#mmrp
mmrp global
Use the mmrp global command to globally enable MMRP. Use the no form of
the command to globally disable MMRP.
Syntax
mmrp global
no mmrp global
Default Configuration
By default, MMRP is disabled globally and on all interfaces.
Command Mode
Global Configuration
User Guidelines
MMRP is not compatible with GVRP/GMRP. Do not enable MMRP on
switches enabled for GVRP/GMRP.
IGMP snooping can interfere with MMRP/MVRP. Disable IGMP snooping if
using MMRP/MVRP.
IGMP snooping can interfere with MMRP/MVRP. Disable IGMP snooping if
using MMRP/MVRP.
MMRP propagates VLAN registration information to allow switches in the
network to dynamically learn and configure VLANs. Refer to IEEE Std.
802.1Q-2005 and IEEE Std. 802.1Qbe-2010 for further information. In
particular, MMRP must also be enabled on the individual interfaces to
become operational.
MMRP does not support configuration of default group filtering behavior.
MMRP does not support the optional Registrar Administrative Control for
MAC addresses.