Users Guide

Layer 2 Switching Commands 912
If a VLAN is configured as forbidden on an interface and MVRP requests
registration (dynamic creation) of the same VLAN, MVRP does not configure
the port association.
MVRP is only supported on trunk or general mode ports.
This command is only available on the N4000 Series switches.
Command History
Introduced in version 6.2.0.1 firmware.
Example
This example enables MVRP globally.
console(config)#mvrp global
mvrp periodic state machine
Use this command to globally enable the MVRP periodic state machine. Use
the no form of the command to globally disable the MVRP periodic state
machine.
Syntax
mvrp periodic state machine
no mvrp periodic state machine
Default Configuration
By default, the MVRP periodic state machine is disabled globally.
Command Mode
Global Configuration
User Guidelines
The periodic state machine ages out MVRP created dynamic VLANs. Use the
show mvrp summary command to display the global MVRP administrative
status.