Setup Guide

Partitions will be aligned on 2048-sector boundaries
Total free space is 30490733 sectors (14.5 GiB)
Number Start (sector) End (sector) Size Code Name
1 2048 526335 256.0 MiB EF00 EFI System
2 526336 788479 128.0 MiB 3000 ONIE-BOOT
ONIE:/ #
13. Verify that efibootmgr runs and displays the valid boot options.
ONIE:/ # efibootmgr
BootCurrent: 0000
Timeout: 1 seconds
BootOrder: 0000,0006,0001,0003
Boot0000* ONIE: Open Network Install Environment
Boot0001* Hard Drive
Boot0003* UEFI: Built-in EFI Shell
Boot0006* UEFI: KingstonDataTraveler 2.01.00 14
ONIE-based license tool
The N2200-ON Series and N3200-ON Series platforms support the ONIE-based license tool. Use this tool to install or uninstall the OS6
license using a valid license (.xml) file in ONIE Rescue mode.
The following conditions apply:
• If the networking operating system (NOS) to install is OS6 AND the switch is a no-OS platform, you must install a license file.
• If the NOS is anything other than OS6 OR the switch is a factory-installed OS6 platform, you do not need a license and the NOS
operates as expected.
1. Get a valid license file for your platform from the Dell EMC support site at www.dell.com/support.
The license file is in .xml format and contains an X509 security certificate. Each license file is valid for a particular service-tag.
2. Get the latest ONIE license tool from the Dell EMC support site at www.dell.com/support.
3. Boot into ONIE Rescue mode.
4. Copy the .xml license file and ONIE license tool to your platform.
The ONIE license tool, license_install.run, is a self-extracted binary.
5. Ensure that the tool has execute(x) permission.
ONIE:/ # ls -ltr license_install.run
-rwxr-xr-x 1 root 0 15638815 May 9 22:57 license_install.run
ONIE:/ #
If the tool does not have execute(x) permission, add execute(x) permission.
ONIE:/ # chmod +x license_install.run
6. Install the ONIE license tool.
ONIE:/ # ./license_install.run
/dev/console
Verifying archive integrity... 100% 100% All good.
Uncompressing LICENSE INSTALLER 100%
.........
Done
7. Run the license command to confirm the license tool installed correctly.
ONIE:/ # license
Version 1.0
Error: wrong number of arguments.
CLI option desciption.
Install a new license or update existing license.
-i <xml_license_file>
Un-install the license.
-u
ONIE:/ #
16
N2200-ON and N3200-ON Series instructions