Setup Guide

CLI options
root@dellemc-diag-os:~# cputool
DellEmc Diag - Cpu Tool
version 2.0, x.xx.x.x-x
build, 2019/07/03,
Syntax: cputool <option>
Show the help-text:=
cputool --help (or)
cputool -h
Display the CPU info using CPU-ID:
cputool --cpuid[=--option] (or)
cputool -i [option]
Display the CPU info using x86info:=
cputool --x86info[=--option] (or)
cputool -x [option]
Display the CPU info:=
cputool --cpuinfo (or)
cputool -C
Read CPU register:=
cputool --readmsr --cpu=<cpuNumber> --reg=<regOffset> (or)
cputool -r -n <cpuNumber> -R <regOffset>
Write CPU register:=
cputool --writemsr --cpu=<cpuNumber> --reg=<regOffset> --val=<value> (or)
cputool -w <cpuNumber> -R <regOffset> -V <value>
Execute repeatedly command by count:=
cputool --iteration=max/<count> [option1] [option2]... (or)
cputool -I max/<count> [option1] [option2]...
Read the specified regiser in LPC bus:=
cputool --readlpc --reg=<reg> --size=<size> (or)
cputool -d -R <reg> -Z <size>
Write the specified regiser in LPC bus:=
cputool --writelpc --reg=<reg> --val=<value> --size=<size> (or)
cputool -W -R <reg> -V <value> -Z <size>
Usage:=
-h, --h Show the help text
-i, --cpuid CPU-Id
-x, --x86info x86 info
-C, --cpuinfo CPU info
-r, --readmsr Read operation
-w, --writemsr Write operation
-n, --cpu= CPU
-R, --reg= Register
-V, --val= Value to be set
-Z, --size= Size
-I, --iteration= Iteration command execution
-d, --readlpc Read from LPC bus
-W, --writelpc Write to LPC bus
root@dellemc-diag-os:~#
Output
root@dellemc-diag-os:~# cputool -h
DellEmc Diag - Cpu Tool
version 2.0, x.xx.x.x-x
build, 2019/07/03,
Syntax: cputool <option>
Show the help-text:=
cputool --help (or)
cputool -h
Display the CPU info using CPU-ID:
cputool --cpuid[=--option] (or)
cputool -i [option]
Display the CPU info using x86info:=
cputool --x86info[=--option] (or)
cputool -x [option]
Dell EMC DIAG-OS tools
21