Setup Guide
Power Supply Test: Overall test results------------- >>>> PASSED
Show Optics in System
Port # Name Status Type Part Number Rev Serial Number
------ ------------ ------ ------- --------------- --- ---------------
49 SFP+ 1 REMOVED
50 SFP+ 2 REMOVED
51 SFP+ 3 REMOVED
52 SFP+ 4 REMOVED
Error reading at offset 0x00
ERROR: i2c_read_tool[738]: ERROR: dev=0x50 adrs=0x00 (6): Not able to read all 256 bytes,
read 0
53 QSFP28 1 PRESENTERROR: i2ctool_get[1055]: ERROR: FAILED <<<---
Error Reading from I2C
Error reading at offset 0x00
ERROR: i2c_read_tool[738]: ERROR: dev=0x50 adrs=0x00 (6): Not able to read all 256 bytes,
read 0
ERROR: i2ctool_get[1055]: ERROR: FAILED <<<---
Error Reading from I2C
ERROR: get_optics_reg[3904]: ERROR: /dev/i2c-1 0x50 0x0 256 Failed, rc = 65280
UnknownNot supported optic type 0
Error reading at offset 0x00
ERROR: i2c_read_tool[738]: ERROR: dev=0x50 adrs=0x00 (6): Not able to read all 256 bytes,
read 0
54 QSFP28 2 PRESENTERROR: i2ctool_get[1055]: ERROR: FAILED <<<---
Error Reading from I2C
Error reading at offset 0x00
ERROR: i2c_read_tool[738]: ERROR: dev=0x50 adrs=0x00 (6): Not able to read all 256 bytes,
read 0
ERROR: i2ctool_get[1055]: ERROR: FAILED <<<---
Error Reading from I2C
ERROR: get_optics_reg[3904]: ERROR: /dev/i2c-1 0x50 0x0 256 Failed, rc = 65280
UnknownNot supported optic type 0
Testing Memory Regions:
Testing Memory Region 0:
Address Read Test ......................................... Passed
Address Write Test ........................................ Passed
Address Walking 1's Test .................................. Passed
Address Walking 0's Test .................................. Passed
Data Read Test ............................................ Passed
Data Write Test ........................................... Passed
Data Walking 1's Test ..................................... Passed
Data Walking 0's Test ..................................... Passed
Data Sliding 1's Test ..................................... Passed
Data Sliding 0's Test ..................................... Passed
Data Pattern Test ......................................... Passed
Memory: Overall test results------------------ >>>> PASSED
MAC Addr Test: Overall test results------------------ >>>> PASSED
Mounted Filesystem Devices:
/dev/mmcblk0p2 / ext4
rmmod: ERROR: Module linux_user_bde is not currently loaded
rmmod: ERROR: Module linux_kernel_bde is not currently loaded
DMA pool size: 33554432
PCI unit 0: Dev 0xb771, Rev 0x01, Chip BCM56771_A0, Driver BCM56770_A0
sysconf_probe successful
global_sal_config successful
*** 1 BCM devices are detected
SOC unit 0 attached to PCI device BCM56771_A0
Loading M0 Firmware located at /etc/dn/diag/linkscan_led_fw.bin
Loading M0 Firmware located at /etc/dn/diag/custom_led.bin
Adr=0x47: FW ID=v5.2.B Dell <platform> 060519 14:27:55 Version=0.0 ROM ID=0
Adr=0x46: FW ID=v5.2.B Dell <platform> 060519 14:27:55 Version=0.0 ROM ID=0
Adr=0x45: FW ID=v5.2.B Dell <platform> 060519 14:27:55 Version=0.0 ROM ID=0
.
.
.
Adr=0x41: FW ID=v5.2.B Dell <platform> 060519 14:27:55 Version=0.0 ROM ID=0
Adr=0x42: FW ID=v5.2.B Dell <platform> 060519 14:27:55 Version=0.0 ROM ID=0
Dell EMC DIAG-OS tools
25