Setup Guide

Adr=0x43: FW ID=v5.2.B Dell <platform> 060519 14:27:55 Version=0.0 ROM ID=0
*** unit 0: ports capable of limited speed range cut-thru
0:bcmi_xgs5_bfd_init: uKernel BFD application not available
Current mode is now ESW
Diag NPU initialization over
Chip ID for PHY:0x0 is : 0x2399
EUROPA chip-ID LSB:2399 for PHY:60
EUROPA chip ID MSB and REV:0x80a0
Chip found!!! Initializing PHY....
Port mode:4 caui mode:1
Port mode:4 caui mode:1
_plp_europa_evora_pm4x25_pm_phys_enable::Checking core init variable:0
FW download Started
25% Downloaded
50% Downloaded
75% Downloaded
Firmware download success. GPREG2:0 retry:18
MST Dload Done:1
Slave Dload Done:3
FW version:0xd00b
_plp_europa_evora_pm4x25_pm_phys_enable::Checking core init variable:0
_plp_europa_evora_pm4x25_pm_port_init:: Initializing port
_plp_europa_evora_pm4x25_pm_port_init:: Initializing port
Core Ver:0
PHY ADDR: 0x60 device statistics counter increment enable settings:
TCAM counters: Enabled
Channel counters: Enabled
PHY ADDR: 0x60 device version major/minor/patch: 1/0/1
PHY ADDR: 0x60 device capabilities
Egress only: Yes
Ingress only: No
Nof channels: 4
Nof rules: 512
Nof vPorts: 256
PHY ADDR: 0x60 device (EIP-217) version major/minor/patch: 1/0/3
PHY ADDR: 0x60 (EIP-217) capabilities
Nof TCAM hit counters: 512
TCAM hit counter size (bits): 64
Nof TCAM packet counters: 1
Nof TCAM byte counters: 0
Nof TCAM global packet counters: 0
Nof TCAM global byte counters: 0
Nof TCAM channel packet counters: 7
Nof TCAM channel byte counters: 0
Nof channels: 4
bcm_plp_cfye_device_init API success for PHY-ID[96], macsec_side [0], return code [0]
PHY ADDR: 0x60 device statistics counter increment enable settings:
SA counters: Enabled
IFC counters: Enabled
IFC1 counters: Enabled
SecY counters: Enabled
RxCAM counters: Enabled
Channel counters: Enabled
PHY ADDR: 0x60version major/minor/patch: 1/0/4
PHY ADDR: 0x60capabilities
Egress only: Yes
Ingress only: No
Nof SA's: 512
Nof SC's: 256
Nof channels: 4
Nof vPorts: 256
PHY ADDR: 0x60(EIP-64) version major/minor/patch: 1/0/2
PHY ADDR: 0x60(EIP-64) capabilities
AES present: Yes
AES feedback mode: No
FPGA solution: No
Galois fields s-boxes: No
Lookup table s-boxes: Yes
MACsec AES only: Yes
GHASH present: Yes
Once cycle core: No
26
Dell EMC DIAG-OS tools