Install Guide

5. Attach the blue wire and black wire to the PSU socket. Secure the wires with the two M4 screws.
NOTE: Attach the blue wire to the V- terminal. Attach the black wire to the V+ terminal.
6. Return the plastic cover back to the PSU socket.
7. Attach the yellow and green wire to the PSU GND. Secure the wire with the M5 screw.
NOTE:
To uninstall the cable from the 1300W DC PSU, remove the plastic cover and unscrew the M4 and M5 screws.
Pull the 1300W DC cable out from the 1300W DC PSU socket.
40 Power supply