Users Guide

Dell EMC Networking CLI 100
Switch Management Commands
Application Deployment
Manages Dell-supplied applications.
Auto-Install Automatically configures switch when a configuration file
is not found.
CLI Macro Configures CLI Macro and displays CLI Macro
information.
Clock Configures the system clock.
Command Line
Configuration Scripting
Manages the switch configuration files.
Configuration and Image
Files
Manages file system and Command Line Interface
scripting commands.
DHCP Client Configures an interface to obtain an IP address via DHCP.
HiveAgent Enables configuration of the Dell HiveAgent
Line Configures the console, SSH, and remote Telnet
connection.
PHY Diagnostics Diagnoses and displays the interface status.
Power Over Ethernet
(PoE)
Configures PoE and displays PoE information.
RMON Can be configured through the CLI and displays RMON
information.
Serviceability Tracing Controls display of debug output to serial port or telnet
console.
sFlow Configures sFlow monitoring.
SNMP Configures SNMP communities, traps and displays SNMP
information.
Support Assist Configures SupportAssist.
SYSLOG Manages and displays SYSLOG messages.
System Management Configures the switch clock, name and authorized users.
Telnet Server Configures telnet service on the switch and displays telnet
information.
Table 1-1. System Command Groups (continued)
Command Group Description