Users Guide

Security Commands 1118
Default Configuration
The default group number is 1.
Command Mode
Captive Portal Instance mode.
User Guidelines
There are no user guidelines for this command.
Example
console(config-cp 2)#group 2
interface
Use the interface command to associate an interface with a captive portal
configuration. Use the no form of this command to remove an association.
Syntax
interface interface
no interface interface
• interface — An interface or range of interfaces.
Default Configuration
No interfaces are associated with a configuration by default.
Command Mode
Captive Portal Instance Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
console(config-cp 2)#interface gi1/0/2