Users Guide

Layer 3 Routing Commands 1240
Command History
Introduced in version 6.2.0.1 firmware.
Example
console# show bfd neighbors
Local Address Neighbor Uptime State Interface
------------- -------------- ----------- ------ ---------
172.16.10.1 172.16.10.20 02:18:49 Up VLAN10
10.1.10.1 10.1.10.20 01:15:25 Up Gi1/0/5
fdf8:f53b::53 fdf8:f53b::58 00:38:11 Up Gi1/0/1
console# show bfd neighbors details
Local IP address............................... 2.1.1.1
Neighbor IP address............................ 2.1.1.2
State.......................................... Up
Interface...................................... VLAN 10
Uptime......................................... 0 00:01:54
Registered Protocol............................ BGP
Local Diag..................................... 0
Demand mode.................................... FALSE
Minimum transmit interval...................... 100 ms
Minimum receive interval....................... 100 ms
Operational transmit interval.................. 100 ms
Operational transmit echo interval............. 0 ms
Detection interval multiplier.................. 3
Local discriminator............................ 1
Remote discriminator........................... 1
Tx Count....................................... 105
Actual TX Echo interval The transmitting interval being used for echo packets.
Minimum receive
interval
The minimum interval at which the system can receive
BFD control packets.
Detection interval
multiplier
The number of BFD control packets that must be missed in
a row to declare a session down.
My discriminator Unique Session Identifier for Local BFD Session.
Your discriminator Unique Session Identifier for Remote BFD Session.
Tx Count The number of transmitted BFD packets.
Rx Count The number of received BFD packets.
Drop Count The number of dropped packets.
Parameters Description