Users Guide

Layer 3 Routing Commands 1359
• ipv6-address [interface interface-id]—The IPv6 address of a BGP peer. If
the peer address is an IPv6 link local address, the interface that defines the
scope of the link local address must be given.
• autodetect interface interface-id —(Optional) The routing interface on
which the neighbor’s link local IPv6 address is auto detected. The interface
ID must be a VLAN routing interface.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
The following fields are displayed.
Field Description
BGP table version Each time phase 2 of the BGP decision process runs to
select new BGP routes, this number is incremented
Local router ID The IP address of the local router.
Status Codes p – The route has been updated in Adj-RIB-Out since
the last UPDATE message was sent. Transmission of an
UPDATE message is pending.
Network The Destination prefix.
Next Hop The BGP Next Hop as advertised to the peer.
Metric The value of the Multi Exit Discriminator (MED), if
the MED is advertised to the peer.
LocPref The local preference. Local preference is never
advertised to external peers.
Path The AS path. The AS path does not include the local AS
number, which is added to the beginning of the AS path
when a route is advertised to an external peer.