Users Guide

Dell EMC Networking CLI 147
802.1x
Command Description Mode
a
dot1x eapolflood Enables the capability of creating VLANs
dynamically when a RADIUS-assigned VLAN
does not exist in the switch.
GC
dot1x eapolflood Enables the flooding of received IEEE 802.1x
frames in the VLAN.
GC
clear authentication sessions Begins the initialization sequence on the
specified port.
PE
mab Enables MAB on an interface. IC
default mab Configures the switch to transmit EAP, PAP, or
CHAP credentials to the RADIUS server for
MAB-authenticated devices connected to the
interface.
IC
mab request format
attribute 1
Configures the format of the MAC address sent
in the User-Name attribute.
IC,
GC
dot1x max-reauth-req Sets the maximum number of times that the
switch sends Extensible Authentication
Protocol EAP-Request/Identity frames to which
no response is received before restarting the
authentication process.
IC
dot1x max-req Sets the maximum number of times the switch
sends an EAP-request frame to the client before
restarting the authentication process.
IC
dot1x pae Enables 802.1X on an interface and sets the
interface role.
IC
dot1x port-control Enables manual control of the authorization
state of the port.
IC
authentication max-users Sets the maximum number of clients supported
on the port when multi-auth authentication is
enabled on the port.
IC
authentication port-control Enables manual control of the authorization
state of the port.
IC
authentication periodic Enables periodic reauthentication of the client. IC