Users Guide

Dell EMC Networking CLI 176
ip unnumbered Identifies an interface as an unnumbered
interface and specifies the numbered interface
providing the borrowed address.
IC
ip unnumbered gratuitous-
arp accept
Enables installation of a static interface route to
the unnumbered peer upon receiving a
gratuitous ARP.
IC
ip unreachables Enables the generation of ICMP Destination
Unreachable messages.
IC
match ip address Specify IP address match criteria for a route
map.
RM
match length Configures packet length matching criteria for a
route map.
RM
match mac-list Configures MAC ACL match criteria for a route
map.
RM
route-map Creates a policy based route map. GC
set interface null0 Routes packets to interface null 0. RM
set ip default next-hop Sets a list of default next-hop IP addresses
to be used if no explicit route for the packet’s
destination address appears in the routing table.
RM
set ip next-hop Specifies the adjacent next-hop router in the
path toward the destination to which the
packets should be forwarded.
RM
set ip precedence Sets the IP precedence bits in the IP packet
header.
RM
show ip brief Displays all the summary information of the IP. PE
Maximum Next
Hops.............................. 16
Displays all pertinent information about the IP
interface.
PE
show ip policy Displays the route maps used for policy based
routing on the router interfaces.
PE
show ip protocols Displays the parameters and current state of the
active routing protocols.
PE
show ip route Displays the routing table. PE
Command Description Mode
a