Users Guide

Switch Management Commands 1949
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode
User Guidelines
Use the show bootvar command to find out which image is the active image.
Example
console#boot system ?
<unit> Unit to be used for this operation. If absent,
command executes on this node.
active Marks the given image as active for subsequent
re-boots.
backup Marks the given image as active for subsequent
re-boots.
console#show version
Machine Description............... Dell Networking Switch
System Model ID................... N4032
Machine Type...................... Dell Networking N4032
Serial Number..................... X00-32C-10
Manufacturer...................... 0xbc00
Burned In MAC Address............. 001E.C9F0.0039
System Object ID.................. 1.3.6.1.4.1.674.10895.3042
CPU Version....................... XLP308L
SOC Version....................... BCM56842_A1
HW Version........................ 1
CPLD Version...................... 17
unit active backup current-active next-active
---- ----------- ----------- -------------- --------------
1
6.0.0.1 6.0.0.0 6.0.0.1 6.0.0.1
clear config
Use the clear config command to restore the switch to the default
configuration.